Industrial 

NRG Plus Booth

NRG Plus, our energy saving spray booths which genuinely saves you energy with a special energy saving mode. The NRG Plus can come as either our SpaceSaver with roof mounted plant, our RearEx, Central Down Draught or Raised Floor with rear or side mounted plant. Allow an extra 1.5m to overall booth size for the plant. All available in our standard (STD) 2.7 meters height booths and our 3 meters light commercial vehicle booths (LCV).

Prices start at:- Standard £16,999 + VAT, fitted.


Specifications

  • Standard: Inside: 7.0m long (6.5 m for SpaceSaver) x 3.9m wide x 2.7m high cabin. Outside: 7.13m long x 4.0m wide x 3.2m (4.15m for SpaceSaver) high
  • Extra width and height 3 leaf door opening, for easier entry and exit, 3.0m wide x 2.6m high
  • Standard booth comes with our standard fans with an air flow of 14,000 m3. (Upgrade to our 4kw low noise centrifugal fans, is available as an optional extra).
  • Double skin, pre-coated white polyester finish, inside and out
  • Running costs of less than £2.50/hour
  • Ducting package included: x2 3.0m spiral + inlet and outlet cowls
  • Extra ductwork available at a cost
  • Suitable for use with water based paints
  • Booths available from stock, for quick delivery and installation
  • Fully detailed operating manual provided
  • Dedicated installation helpline
Commercial

​Light Commercial Vehicle 

Standard

The standard height for our spray booths is 2.7 meters internal. This allows you to easily fit any car inside and leaves plenty of room even with 4x4 vehicles. Most other companies offer 2.4 meters as standard, but with our spray booths it gives you the opportunity to be able to spray small vans which would not fit in 2.4 meter high booth. 

Standard

Light Commercial vehicle

Top Quality Spray Booths at Affordable Prices.

Our latest energy saving Booths with a genuine energy saving mode.

F.a.d.s Fast air drying system, speed-up bake time by 50%

Commercial 

Standard

Central down draught booth

The central down draught booth has full roof inlet filtration and extraction from a 4.0m x 2.0m central pit, which gives an even air flow through the booth. The plant can be put on either side or the rear of the booth, allow an extra 1.5m to overall booth size for the plant.

Prices start at:- Standard: £17,499 + VAT, fitted.


Specifications

  • Standard: Inside: 7.0m long x 3.9m wide x 2.7m high cabin. Outside: 7.13m long x 4.0m wide x 3.2m high
  • Extra width and height 3 leaf door opening, for easier entry and exit. 3.0m wide x 2.6m high.
  • Either side or rear  mounted plant
    • Standard booth comes with our standard fans with an air flow of 14,000 m3. (Upgrade to our 4kw low noise centrifugal fans, is available as an optional extra).
  • Double skin, pre-coated white polyester finish, inside and out
  • Running costs of less than £2.50/hour
  • Ducting package included: x2 3.0m spiral + inlet and outlet cowls
  • Extra ductwork available at a cost
  • Suitable for use with water based paints
  • Booths available from stock, for quick delivery and installation
  • Fully detailed operating manual provided
  • Dedicated installation helpline

Standard

by R​eeve spray booths, spray booths specialist  

Home

Smart Repair booths

Our Smart Repair Booths perform as well as any other smart repair booths, but have the advantage of extra height and entrance width. The unique design will fit into most workshops, and will allow you to do smart repairs on anything from a bumper or a panel up to a full vehicle.You get the option of fitted doors or curtain entrance. Our Smart Repair Booths come in 5 size options. Allow an extra 1.5m to overall booth size for the plant


Specifications

  • 3.0m long x 3.9m wide x 2.7m high cabin. Price £8,000 +VAT, fitted.
  • 4.0m long x 3.9m wide x 2.7m high cabin. Price £8,500 + VAT, fitted.
  • 5.0m long x 3.9m wide x 2.7m high cabin. Price £9,000 +VAT, fitted.
  • 6.0m long x 3.9m wide x 2.7m high cabin. Price £9,500 + VAT, fitted.
  • 7.0m long x 3.9m wide x 2.7m high cabin. Price £10,000 + VAT, fitted.
  • Extra width and height 3 leaf door opening, for easier entry and exit. 3m wide x 2.6m high.
  • Surface mounted with unique rear extraction chest, so no pits required
  • Double skin, pre-coated white polyester finish, inside and out
  • Ducting package included
  • Booths available from stock, for quick delivery and installation
  • Fully detailed operating manual provided
  • Dedicated installation helpline

Rear ex Booth

Our RearEx Spray booth uses an extraction chest that sits at the rear of the booth (side is also an option), instead of the usual pit extraction with the side extraction plant, Allow an extra 1.5m to overall booth size for the plant. This spray booth is great for units with low height ceilings as the plant sits on top of the extraction chest, and sits no higher than the spray booth itself. It is easier to maintain as well because it's all at floor level and is easily accessible. The rear chest is convenient as there is no ground work needed before the installation. 

Prices start at:- Standard £15,499 + VAT, fitted.


Specifications

  • Standard:Inside: 7.0m long x 3.9m wide x 2.7m high cabin. Outside: 7.13m long x 4.0m wide x 3.2m high
  • Extra width and height 3 leaf door opening, for easier entry and exit. 3.0m wide x 2.6m high.
  • Surface mounted with unique rear extraction chest 
    • Standard booth comes with our standard fans with an air flow of 14,000 m3. (Upgrade to our 4kw low noise centrifugal fans, is available as an optional extra).
  • Double skin, pre-coated white polyester finish, inside and out
  • Running costs of less than £2.50/hour
  • Ducting package included: x2 3.0m spiral + inlet and outlet cowls
  • Extra ductwork available at a cost
  • Suitable for use with water based paints
  • Booths available from stock, for quick delivery and installation
  • Fully detailed operating manual provided
  • Dedicated installation helpline

Spacesaver Booth

The Spacesaver spray booth does exactly what it says in the title. It saves you space by being able to fit into the corner of your garage. It does this because it has the extraction area built within the rear of the booth and also has roof mounted plant, instead of the usual pit extraction with the side extraction plant. It also saves you more money as you will not need to dig a pit.

Prices start at:- Standard £15,499 + VAT, fitted.


Specifications

  • Standard:Inside: 6.5m long x 3.9m wide x 2.7m high cabin. Outside: 7.13m long x 4.0m wide x 4.15m high
  • Extra width and height 3 leaf door opening, for easier entry and exit. 3.0m wide x 2.6m high.
  • Surface mounted with unique roof mounted plant
    • Standard booth comes with our standard fans with an air flow of 14,000 m3. (Upgrade to our 4kw low noise centrifugal fans, is available as an optional extra).
  • Double skin, pre-coated white polyester finish, inside and out
  • Running costs of less than £2.50/hour
  • Ducting package included: x2 3.0m spiral + inlet and outlet cowls
  • Extra ductwork available at a cost
  • Suitable for use with water based paints
  • Booths available from stock, for quick delivery and installation
  • Fully detailed operating manual provided
  • Dedicated installation helpline

Raised Floor Booth

Raised floor spray booth gives you a full floor extract without the groundwork of a down draught. The 250mm raised floor gives the booth an even airflow throughout, and the plant can be mounted on either side or at the back of the booth, allow an extra 1.5m to overall booth size for the plant. Internal humpback ramp design allows you to save workshop floorspace or external ramp design can be installed if preferred. 

Prices start at:- Standard £24,499 + VAT, fitted.


Specifications

  • Standard: Inside: 7.0m long x 3.9m wide x 2.45m high cabin. Outside: 7.13m long x 4.0m wide x 3.2m high 
  • Extra width and height 3 leaf door opening, for easier entry and exit. 3.0m wide x 2.6m high. 
  • Either side or rear  mounted plant
    •  Standard booth comes with our standard fans with an air flow of 14,000 m3. (Upgrade to our 4kw low noise centrifugal fans, is available as an optional extra).
  • Double Pitched humpback ramp can be placed internally or externally.
  • Double skin, pre-coated white polyester finish, inside and out
  • Running costs of less than £2.50/hour
  • Ducting package included: x2 3.0m spiral + inlet and outlet cowls
  • Extra ductwork available at a cost
  • Suitable for use with water based paints
  • Booths available from stock, for quick delivery and installation
  • Fully detailed operating manual provided
  • Dedicated installation helpline